Recycled materials are added to the plastic barrel during the p

  •   Does the appearance of the plastic barrel directly affect the company's sales business?

      In terms of appearance, Dustbin Mould directly affected the company's sales business and corporate image. The illusion of product quality problems provided to customers affected cooperation and caused unnecessary economic losses.

      Understand the nature of raw materials and adjust the process formula reasonably. The technical parameters of blow-molded tray products strictly comply with national standards, and the product appearance design and product size can also be tailored according to needs. Plastic barrel products are widely used in chemical, dye, pharmaceutical, pesticide, metallurgy, rare earth, machinery, electronics, environmental protection, textile, food, and other industries. If the fluidity of the raw material is poor after heating, it will cause the barrel wall to shine.

      Due to external influences, the raw material has relatively large water content. The large amount of water vapor generated during the production process will cause the cylinder wall to be dark but not bright during the production process.

      Recycled materials are added to the plastic barrel during the production process, which has a large specificity and makes the appearance of the barrel bright. This problem can be solved by reducing the proportion of recycled materials and adding low-pressure resin appropriately (Emerson).

      Leakage of the mold cooling system and long-term operation of the mold will cause corrosion and damage to the sealing system. Water leakage occurred in some parts of the mold, causing the barrel wall to become blunt. The sealing strip should be replaced to ensure that the leakage problem is solved. The mold exhaust system is not good. Too much gas stays on the mold during the production process, resulting in poor gloss. Therefore, the mold exhaust system must be inspected and repaired in time.

      Injection molding process problems: insufficient packaging pressure, short packaging time, resulting in insufficient barrel density (unit: g/cm3 or kg/m3), poor gloss, packaging pressure should be increased to delay packaging time.

      Basket Mould is also our product, welcome to consult and purchase.