Stainless Steel Kitchen Faucet Replacement Method Stainless Ste

  • Stainless Steel Kitchen Faucet is one of the essential items in home life. We use it every day. For a long time, the faucet will be damaged. In order to make the faucet work normally, the faucet is sometimes replaced. So, how do you change the faucet? Let’s take a look at it with Xiaobian.

    1. Close the total water valve
    How to change the faucet? First we need to close the faucet's total water valve, and then drain the remaining water in the water pipe, so that there will be no water flowing when the faucet valve core is replaced, thus affecting the operation of replacing the faucet valve core.

    2. Remove the rubber band
    Next, the rubber band on the faucet should be removed. Since each faucet has a blue and red rubber band, it is necessary to remember the two corresponding positions because it is used to distinguish between cold water and hot water. There will be no errors when reinstalling.

    3. Disassemble the old spool
    Now it is necessary to remove the old spool of the faucet. At this time, use a special wrench to unscrew the old spool, remove it, and then clean the surrounding area for the next operation.

    4. Install a new spool
    After the above operations are completed, the new valve core will be placed in the faucet. At this time, it is necessary to adjust the position and orientation of the valve core. If the handle of the spool is facing its direction, the water is open. If the handle of the spool is facing the left and right sides, the water is closed. Once the spool is installed, the next step is to tighten the red and blue cover with a screwdriver so that the faucet is replaced.